Sales Trap – We Love To Talk, But Need To Listen

In today’s economy, homeowners are aiming to save as much money as they can, wherever they can. A key thing every homeowner can do to save money and to save on each energy bill is to weatherproof his or her home. Particularly if you own an older home, it is important to weatherproof your home — you may be losing money on your energy bill due to air flowing in and out of many tiny cracks!

In order to remove the piston, unbolt the base flange from the body using a 3mm allen key. Depending on the BPV model you have, this may be 5-6 socket head cap screws. When removing the piston be Double Jacketed Gaskets careful to not cut the o-ring. If your o-ring is damaged, you can contact COBB Tuning for a replacement.

Step three: Begin draining the old oil by locating the oil plug on the vehicle’s underside. Next, place the drain pan right below the plug, and then, use the wrench to carefully turn the plug in a counterclockwise motion up until the point that it can be rotated freely. Be extra careful when removing the plug as the used oil might come rushing down.

Once you have decided which route you will take, remove the paper gasket from the box and place it on the valve, using both bolts to hold it in place. Simple place the valve back onto the BPV flange and retighten it. Now word of caution here.. If you ARE using an alumn TMIC, I strongly suggest using a ratchet extension with a 10mm deep well socket to hand tighten both bolts evenly. Once they are hand tight, give one good 1/4 inch crank on both bolts and that’s it. They hardly require much torque and we keep hearing about Hercules breaking off his bolts in the cold Spiral Wound Gaskets pipe or stripping the threads.

The flow rate through the filter may be low due to clogged or undersized piping. Cleaning the lines or changing to larger pipes will correct this problem.

Commercially available shower pans are complete, ready-to-install units. They eliminate the need to create a mud sloped floor, a shower liner or tray, and tiling of the shower floor.

When replacing or repairing any parts on your wood burning stove it is essential to wait until the stove has fully cooled down. By carrying out regular checks on your wood burning stove you can ensure that you get the best out of it for many years to come. Not only is it an environmentally friendly source of heating but it will keep you warm and cosy throughout the winter months.

Recent Posts



Contact Us

4640 Hidden Meadow Drive, Oakes, ND, 58474

Call Us: 701-710-0824

Consultation Banner


Contact Form